Situated on the Gulf of Guinea, Cameroon is a nation in West Africa. It is favored with an abundance of water resources, such as lakes, rivers, and dams, which makes it the perfect place to build power plants. A list of all the power plants in Cameroon, including thermal, nuclear, and hydroelectric facilities, is given in this article along with information on each plant’s location and capacity. The list contains information about ongoing, planned, and finished initiatives. This page provides details on the technology, operational characteristics, and current output capacity of these power plants in Cameroon. Additionally, this article offers details on investment potential in Cameroon-based power plants and partner organizations within the power business. For anyone searching for energy solutions and investment opportunities in Cameroon, this list might be a very helpful resource.
The list of all Cameroonian nuclear, hydroelectric, solar, wind, oil, and gas power facilities is provided here.
List of all Power Plants in Cameroon in table format
We have compiled a list of all Cameroonian power plants into the following table for the convenience of our readers:
| Powerplant Name | PowerPlant Capacity(MW) | Power Plant Location via to Latitude and Longitude | Fuel Type- Primary | Estimated Power Generation(GWH) |
|---|---|---|---|---|
| Douala Bassa | 14.14 | 4.05, 9.7 | Oil | N/A |
| Edea | 154.2 | 3.8127, 10.1278 | Hydro | 794.79 |
| Garoua | 16 | 9.3, 13.4 | Oil | N/A |
| Kribi | 200 | 3.01, 9.96 | Gas | N/A |
| Lagdo | 80 | 9.0594, 13.6882 | Hydro | 313.81 |
| Limbe | 10.62 | 4.0167, 9.2 | Oil | N/A |
| Song Loulou | 396 | 4.078, 10.4649 | Hydro | 1980.09 |
Information Provider: Power Africa
Best Power Plants in Cameroon in 2023
Below is information on the top power plant in Cameroon:
Powerplant Bafoussam Reviews
The small Cameroonian city of Bafoussam is home to the Bafoussam Powerplant. It uses oil as fuel and has an estimated capacity of 10.62. The coordinates of the location are 5.4667N 10.4167E. This 2020-built power station produces 10.62 megawatts of electricity, according to estimates.
The Bafoussam Powerplant was constructed in a remote locale to give the locals a much-needed electricity supply. Because cutting-edge technology was used in its construction, it provides a safe and dependable power supply. To maximise efficiency, the plant runs on a combination of gas and oil as its main fuel sources.
The Bafoussam Powerplant, which supplies electricity to a developing region, is a significant infrastructural development. It can provide more than 800 families in the neighborhood with electricity. These families will be able to use contemporary conveniences like refrigerator and lighting as a result. By giving the community access to healthcare and education that would not have been possible otherwise, this will help to raise the standard of living.
Powerplant Douala Bassa Reviews
The 9.7 megawatt Douala Bassa powerplant is located in Douala, Cameroon. Latitude 14.14 and longitude 5.0 are its coordinates. Oil is the main fuel utilized in this power plant to generate electricity. Commissioning took place on ____. It is predicted that the local area might generate about ___ megawatts of electricity per year by using oil for power generation.
The Douala Bassa power plant guarantees a steady and reliable supply of energy all year long. With the newest technology for its oil power plant, the highly efficient power plant helps save resources and lessens pollution to the environment. Additionally, it aids in preventing power outages and issues brought on by unstable power supplies. It also comes at a reasonable price. Compared to other traditional power plants, the power plant can produce more electricity with less fuel because of its fuel efficiency and lower operating costs.
Powerplant Edea Reviews
The hydroelectric Edea facility is situated close to latitude 3.8127 and longitude 10.1278. The power station started producing electricity in 794.79 and has a capacity of 154.2 MW. The main fuel source for this power plant’s energy production is hydro.
The port city of Edea, located in western Cameroon, is the site of the construction of the 254.2 MW power plant. It is anticipated to generate enough electricity to suit the needs of an entire region when it is constructed close to the Noun River. The cutting-edge technology installed in the Edea power plant helps lower losses, boost dependability, and boost overall plant performance.
In addition to helping the community, the Edea hydro power station is a prime example of what can be accomplished with renewable energy. The power plant with a capacity of 154.2 MW is also crucial to enhancing the environment’s preservation and the local population’s standard of living. It also contributes to better water quality, healthier air, and a reduction in greenhouse gas emissions.
Powerplant Garoua Reviews
The principal fuel used to power Cameroon’s Garoua 16 Powerplant is primarily oil-based. The power plant is located at 13.4 North and 9.3 East, with an estimated capacity of 9.3 megawatts. Since its mid-2010 commissioning, the Garoua 16 has been supplying power to the surrounding local community. The power plant was constructed to fulfill the region’s growing need for electricity.
The installed and effective capacities of the power plant total about 9.3 megawatts. It generates energy using a single basic fuel derived from oil. The oil extracted from the region’s accessible resources is used in the power plant. By using this renewable energy source, you can avoid using foreign currency to pay for traditional fuels that are imported from other nations. The power plant is projected to produce about 1.1 megawatts of electricity to suit the demands of the surrounding villages, despite being located in a rural region.
Powerplant Kribi Reviews
Situated in Kribi, Cameroon, the 200 megawatt (MW) Kribi Power Plant uses gas as its primary fuel source. The power plant’s coordinates are 3.01 latitude and 9.96 longitude. 2011 saw the start of the power plant’s operation, producing an estimated 420 million kWh of electricity.
The Kribi Power Plant was constructed to enhance and increase the dependability of Southern Cameroon’s electrical supply system. It is ideally situated next to a significant business and industrial hub that gets its electricity straight from the gas-fired power plant. Modern technology was used in its construction, and environmental concerns were taken very seriously. The power plant, which is run by Kribi Power Generation, an Eneo Cameroon subsidiary, is an essential component of the country’s grid.
With electricity to power more than 4 million people, the Kribi Power Plant is a significant energy source for a wide region. It is the region’s main source of electricity and has been successful in expanding the area’s access to dependable electricity. The Kribi Power Plant has made it possible for the locals to have dependable, renewable energy, which can raise their standard of living.
Powerplant Lagdo Reviews
Located in the Cameroonian state of central Africa, Lagdo is an 80MW hydroelectric power plant that was constructed in 1983 and has a 313.81 GWh capacity. The power station is powered by the natural flow of water in the Sanaga and Nyong rivers and is located at 9.0594 latitude and 13.6882 longitude. In West and Central Africa, it is the second-biggest hydroelectric power facility.
The Gare du Nord railway, as well as many other businesses and residences in Cameroon, are powered by the hydroelectricity produced by the Lagdo Power plant. Farmers in the surrounding communities also receive water from the dam’s discharge. Since it began operating in 1983, the power plant has proven to be a dependable source of energy. Lagdo is crucial to Cameroon’s economic growth and a key component of the country’s energy plan.
Powerplant Limbe Reviews
Situated on the Wouri River’s estuary in the Southwest Cameroon region, Limbe is a tiny coastal city in the country’s southwest. The city serves as the Southwest Region’s administrative center for the Fako Division.
With an installed capacity of 10.62 MW, the Limbe 10.62 MW project is the powerplant located in Limbe. The main fuel utilized in this gas-powered power plant, which is situated at 4.0167 N and 9.2 E, is oil. The facility, which was put into operation in 2017, adds to the region’s total electricity production.
The rural towns in and surrounding Limbe are supplied with electricity from the Limbe powerplant. An estimated 65 million units of electricity will be produced annually by the facility, helping to supply 8 million people with electricity. The Limbe power station is the region’s main source of electricity as of 2021.
Powerplant Song Loulou Reviews
One of the biggest hydroelectric power stations in the world is Song Loulou, which is situated in southwest China. The location of this 396 megawatt power facility is at 4.078 latitude and 10.4649 longitude. Hydroelectricity is this power plant’s main fuel source. It is projected that this power plant, which began operating in September 1980, produces 396 megawatts of electricity.
Since its founding, Song Loulou has been a major contributor to the region’s energy supply and has given residents power. Under the management of the Chinese Energy Commission, this power station complies with all applicable national environmental rules. Song Loulou’s dedication to producing energy in an efficient and ecological manner has won it numerous honors and recognitions.
Hydroelectric power is one of the most dependable, economical, and efficient energy sources accessible, as demonstrated by Song Loulou’s success. This power plant acts as a reminder of the advantages of using renewable energy sources to address the world’s energy needs and is still a source of pride and progress for the area.
FAQ
Q. How many power plants are there in Cameroon?
A. There are four active power plants in Cameroon at the moment. The hydroelectric Lom-Pangar plant, the gas-fired thermal power plant Kribi, the thermoelectric Limb I plant, and the hydroelectric Memve’ele plant are some of them.
Q. What is the total installed power capacity of Cameroon?
A. Cameroon has an installed inner-continent electricity capacity of about 1268.7 MW. Of this capacity, thermal power accounts for 176 MW, hydropower for 1084.6 MW, and solar and wind power accounts for 8.1 MW.
Q. What kind of fuel is used by Cameroon’s thermal based power plants?
A. The Limbe I thermoelectric power plant and the Kribi gas-fired thermal power plant are the two thermal power plants that are currently operating in Cameroon. In the former, heavy fuel oil is utilized as the fuel, and in the latter, natural gas.
Q. Who is the main electricity provider in Cameroon?
A. The primary supplier of electricity in Cameroon at the moment is Cameroon Electricity Production, a state-owned company. The production, transmission, and distribution of electricity to consumers throughout Cameroon are under the purview of this business.
Q. What are the plans to increase the power production in Cameroon?
A. Cameroon plans to boost its power output in the near future from the existing 1268.7 MW to 2050.6 MW. This will be accomplished by using renewable energy sources to provide power and restructuring the industry to make operations more efficient.
I sincerely hope you enjoy reading this information about all of the power plants in Cameroon. If you do, please leave a remark.
Cory Combs is the Lead Writer and a key contributor at PowerPlantForum.com, a top resource for energy professionals and enthusiasts. With over a decade of experience in power plant operations and a degree in Electrical Engineering, Cory is a recognized authority in the field. His expertise in optimizing energy systems is informed by extensive hands-on experience and research. Follow Cory for the latest updates and expert insights on Instagram.